Model Boat Electronics

This Page is for General Model boat electronic components .From various manufactures including Robbe, Graupner ,JJC With things like Light Signaling units electronic switches ,Smoke Generators and alike

Smoke Generators

Mixers and Light Switches

Duo Switch (Memo) 1-8445
Two-channel switch module for operating two separate switched functions On and Off, or - with special wiring - for reversing electric motors. Designed for switching auxiliary working systems in model aircraft, boats and cars. All switches are controlled directly from the receiver, and are fitted with an adjustor for setting the switching point. The output of the electronic switches is galvanically separated from the relay input. The maximum switching capacity of the relay is 24 V / 5 A.

The switch modules features two alternative types of switching process:
1. Normal version, the operated function remains switched on as long as the associated transmitter control is held in the ´ON´ position.
2. Memory version, when the transmitter control is operated, the function is switched on, and the ON state is stored. The function is only switched off again when you operate the same transmitter control a second time. The relay outputs take the form of screw-terminals, so no soldering is required.

Specification:: Weight: 24 g Voltage: 24 Volts current: 5 mA Dimensions: 51x42.5x14 mm

£34.17

Miscellaneous

Graupner Wet Protect
Description
GRAUPNER wet-protect is a unique damp-guard spray which has been proved to protect metallic, electrical and electronic components effectively against all forms of damp (vapour, humidity, condensation, spray, mist, rain, "acid" rain, salt water etc.).
The material contains no resins, silicones, acrylics, Teflon or aromatic substances.
GRAUPNER wet-protect behaves neutrally to standardplastics (except PVC), rubber, glass, paint and ceramics, and metals such as steel, stainless steel, iron, aluminium, copper, zinc, brass and tin; it does not attack windings or insulating lacquers. It is not affected by tensides, but can be removed easily using circuit board cleaner, brake cleaner or methylated spirit.
It is immiscible with water, and does not emulsify.
GRAUPNER wet-protect is not susceptible to weathering and temperature effects, and is fully effective in the temperature range -20°C to +130°C

£15.84

Please Note Prices are subject to change without notice

Westbourne Model.co.uk
Is owned and run by
Westbourne Model Centre
41 Seamoor Rd Westbourne Dorset
BH4 9AE Tell/Fax + 44 (0) 1202 763480