Robbe Radio Control Model Boat Kits

ROBBE Are one of the largest model companies in the World. They produce a range of well proven and tested good quality kits. Several of these can be fitted with a range of optional working accessories utilising anything up to twenty six radio channels. Hulls are moulded in either fibre glass or Plura, a superior type of ABS material which gives excellent strength all come with English instructions and normally full size plan. There fittings tend to contain things like deck railing, bollards, lifebelts, and are made from a mixture of plastic brass and chromed metal.

Sea-Jet Evolution Pt No 1266

Racy water sportsman with brushless electric driveAfter many successful years, the time is ripe for a successor to the robbe Sea-Jet - the Evolution.
The new Sea-Jet has been both optically and technically overhauled and re-designed. Learning from the modern competition Race-Jets, the optical appearance is significantly racier than its predecessor to improve its roll stability.
The hull has been made wider and lower.to give the Evolution the power it deserves, we have equipped the Evolution with twin brushless drives. So that the power can be translated into thrust, the props are directly mounted to the motors, therefore no gear boxes or drive-shafts to sap the power. A centrally mounted rudder and optimised hull shape guarantee high manoevrability.
With these attributes, the new robbe Sea-Jet is best prepared to take part in the Evolution class of the Sea-Jet Cup.Specification: Length: 685 mm Width: 240 mm Height: 370 mm Total displacement: 2100 g

£185.99

Sea Jet Pt No 1066

Radio-controlled water sport boat with ready-made hull and electric power system

The full-size boats on which the robbe Sea-Jet is based originated in the USA, but the machines have now developed into a popular leisure sports pastime around Europe´s beaches.
The robbe Sea-Jet emulates the full-size very accurately, and offers nothing less than 100% fun. The boat´s very low Centre of Gravity means that it cannot capsize, and it is easy to steer around any course. In choppy water it can carry out impressive jumps without any problems. The hull is supplied yellow overall, and is factory-trimmed and glued. To finish the hull all you have to do is apply the self-adhesive decals. A powerful electric motor drives twin contra-rotating surface-piercing propellers through a gearbox. The model is extremely agile, but a two-channel system is perfectly adequate to control it. Power for the motor and receiving system comes from a seven-cell rapid-charge battery. Assembly is just a matter of installing the motor, power system and radio control system, plus assembling and painting the driver figure.
Owning a Sea-Jet gives you the chance to participate in the robbe Sea-Jet Cup competition, which is held in many towns in Germany and Europe. For more information please see the following pages.

Specification:
Length: 690 mm
Width: 150 mm
Total displacement: 1450 g

£122.61

Dolly Pt No 1005

Radio-controlled semi-scale model of a launch to 1:20 scaleThis general-purpose boat type can be seen in many of the world's harbours.These small launches can be fitted out for a wide variety of tasks, and are commonly used to transport
persons or materials; they can also be used as tugs for larger vessels if fitted with special towing gear, or even as firefighting launches.The electric power system for our model of the Dolly has been carefully selected to suit the vessel, and the single-screw system provides an excellent scale performance.
The hull features an integral screw tunnel, giving very good manoeuvrability. The recommended 6 V/1.7 Ah battery gives running times of up to an hour.Kit contents:
• Ready-made, red-pigmented hull, clear moulded superstructure (no glazing panels to cut out) and deck (all parts trimmed to shape).
• Full set of die-cut parts for installing the power and radio control systems
• Complete rudder system, stern tube and propeller shaft, propeller and coupling
• Self-adhesive decals and window masks
• Multi-lingual building instructions and plan Fittings set No. 1006
Includes many small parts such as lifebelts, bollards etc. for decorating the model. Crew figures not included.

Specification: Length: 550 mm Width: 165 mm Scale: 1:20 Total displacement: 1200 g

Dolly Pt No 1005 ... £53.00
Dolly Fittings Pt No 1006 ... £18.58

Pulla III Pt No 1159

Radio-controlled model of a working ship with salvage crane to 1:25 scale
Fittings set and motor includedIn many harbours of the world you will find examples of the full-size Paula III. These industrious vessels are constantly shunting in and out of port to carry out their work in the coastal regions, around the estuaries of large rivers and in the harbour approaches. Manoeuvrable and very fast for their size, these working ships are employed for all manner of tasks. Amongst their duties are retrieving and laying sea warnings and markers,
clearing away minor obstacles in shipping lanes and transporting special equipment required for marine research.
This wide-ranging versatility gives the imaginative modeller almost unlimited scope for completing and operating the boat.
The Paula III is the ideal model for the beginner and advanced model builder alike, but is likely to appeal to the traditional modeller who enjoys "real" construction work. We recommend the use of a lead-acid battery which gives extremely long running times. The salvage crane can lower various loads over the model´s stern and retrieve them again.Specification:
Length: 710 mm
Width: 215 mm
Scale: 1:25
Total displacement: 2500 g

Paula III ... £105.99
Buoy set For Paula III Pt 1539 ... £18.00
Special-Function Set for Paula III Pt 1538 ... £36.99

Neptune Pt No 1030

Radio controlled semi-scale model of a harbour tug to 1:50 scaleAt the design stage of this model we concentrated on scale fidelity and lovingly reproduced detail features. A working, fixed fire monitor is included, mounted on the lower mast platform. The Neptun’s power system is based on a swivelling Kort nozzle for extreme manoeuvrability, and the vessel makes light work of tricky towing manoeuvres in tight situations. The towing hook can be opened and closed by remote control.Kit contents:
* Vacuum-moulded hull, bulwark, engine room and wheelhouse
* Plastic funnel and other small parts
* Wooden internal fittings
* Propeller shaft, propeller, coupling
* Injection-moulded Kort nozzle, working towing gear, railing stanchions
* RC linkage components, small parts and fixings
* Comprehensive, richly illustrated building instructions, detailed plans Specification:
Length: 570 mm
Width: 175 mm
Scale: 1:50
Total displacement: 2500

Neptune ... £97.50
Fittings Set Neptune Pt No 1031 ... £28.86

SRK Berlin

Purpose of the DGzRS
The German Association for the Rescue of the Shipwrecked (DGzRS) is an independent body which carries out maritime search and rescue services under its own authority, and it has its own fleet of emergency sea cruisers and lifeboats. The lifeboatmen of the DGzRS are ready for work at any time and in any weather. Hardly a day goes past when they don’t hear the call "SOS ... launch the lifeboats!" All search and rescue measures at sea are co-ordinated by the Bremen marine emergency management team. Without exception, the work of the rescue association is financed by donations and contributions from members, and no state funding or public backing is provided. The association’s patron is the Federal President of Germany.

Crew figures not included.

Kit contents:
One-piece Plura hull with machined openings and pre-cut holes
Die-cut and profiled plastic hull stiffening members, with supports for RC and auxiliary system components
3-blade rudder system, vacuum-moulded daughter boat cradle, separate stern flap
Superstructure sections vacuum-moulded in clear material (no separate glazing panels required)
Complex mast with numerous lamps and aerials
Fully articulated fire monitors assembled from injection-moulded components
Aluminium gangways, die-cut and bored
RC installation component pack
Decal sheet and name placards, numerous additional fittings
Detailed building instructions and detailed plans.

Model characteristics :
The robbe model of the ocean-going emergency cruiser "Berlin" is a true scale model of the full-size to 1:25 scale both in terms of appearance and technical functions. Like the original vessel the robbe model features:
Three powerful, separately controlled engines
3-blade rudder system
Powerful bow thruster
Two fully articulated fire monitors equipped with a powerful pump
Working daughter boat "Steppke"; can be operated independently
Rise and fall stern flap
Cable winch for retrieving the daughter boat
Mechanism for engaging and releasing the tow cable
Wide-ranging lighting system, e.g. searchlight, navigation lamps, towing light

Several special function sets are available, so that the model can be fitted out in easy stages with all the optional fittings and auxiliary working systems. If you install all the optional equipment, you can carry out all manner
of interesting operations on the water with your Berlin.

Note that a separate RC system is required for the "Steppke".

Specification:
Length: 1100 mm Width: 260 mm Height: 610 mm Scale: 1:25 Total displacement: 7000 g

SRK Berlin ... £380.00
Fittings Set Berlin (1) 1-1152 ... £299.99
Power Function Set Berlin (1) 1-1153 ... £170.00
Stern Flap+Boat Capture (1) 1-1154 ... £98.00
Daughter Boat, Steppke (1) 1-1151 ... £79.00
SRK Berlin Inc 1153-1153-1154-1154 Spec/Offer ... £959.99

S130 Greman S Boat Pt No 1165

Fittings set and power set included

One of the most interesting ship developments of the second World War, both visually and technically, was the S-boat, and the S 130 is a typical representative of the class. These 35 m long high-speed boats were designed primarily for work in the English Channel and the North Sea. The full-size vessel on which our model is based was built by the Schlichting shipyard in Travemuende, and was launched on 21 October 1943.
Just like the original boat, the outstanding features of our model of the S 130 are its high maximum speed and excellent manoeuvrability.

Kit contents:
Vacuum-moulded plastic hull Vacuum-moulded deck and superstructure Plastic gun and torpedo components
Die-cut plastic internal fittings 3 x POWER 400/45 electric motors Stern tubes, shafts and propellers Complete fittings set
Decal sheet
Detailed, illustrated building instructions
Boatstand

Specification:
Length: 870 mm Width: 140 mm Scale: 1:40 Total displacement: 1450 g

£246.00

Fire Boat FLB Pt No 1091

Semi-scale model of a fire-fighting boat to 1 : 25 scale

"Bulk freighter burning at river kilometre 355". These words trigger the FLB-1
fire-fighting boat into action, and it immediately leaves its mooring and dashes to the aid of those in need.
These boats form the backbone of the fire-fighting service, which also provides technical assistance in German waters.

Kit contents:
Vacuum-moulded ABS plastic hull , Vacuum-moulded ABS plastic superstructure, deck, bulwark and small parts
CNC-machined plastic parts for installation of power system and RC system , Fire monitor
Corrugated sheet material , Electric motor (400-size) , 2 mm Ø propeller shaft and stern tube
30 mm Ø propeller , Self-centring shaft coupling , Small assembly parts , Multi-colour decal sheet
Multi-lingual building instructions , Boatstand

RC functions
Rudder , Throttle , *Auxiliary working systems" Lighting systems"

Specification:
Length: 630 mm Width: 185 mm Height: 380 mm Total displacement: 2000 g

Fire Boat FLB ... £110.43
Fittings set Fire Boat FLB- (1) 1-1092 ... £48.50

Düsseldorf Fire Fighting Boat Pt No 1100

Scale model of the "Düsseldorf" fire-fighting boat to 1:25 scale

The Düsseldorf fire-fighting boat was developed and built by the Rheinwerft company of Mainz-Mombach, and it is operated in the Ruhr industrial region of Germany. The vessel is designed specifically to cope with disaster situations, such as a ship on fire, a major oil leak or a harbour system in
danger of explosion, and its fire monitors, operating at a pressure of 10.5 bar, can hurl water or foam 45 m high and a distance of up to 95 m. The two V-12 engines produce a total of 930 kW (1260 BHP), giving the boat a maximum speed of around 37 km/hr.

The Robbe kit of the "Düsseldorf" fire-fighting boat is large and capacious enough to accommodate all the equipment required to emulate the wide-ranging facilities of the full-size vessel. Optional working systems include the fire monitors, crane, anchor winch, radar, searchlights, blue light, horn and siren, and also the sound of the diesel engines. The plastic hull is moulded in thick-walled material, and it offers plenty of space for the numerous mechanical and electronic parts required for the auxiliary working systems.

The model is propelled by two proven robbe Navy-Kompakt power systems, giving it an impressive turn of speed. Four large rudders guarantee extreme manoeuvring capability both forwards and astern. The fire monitors can be swivelled horizontally and vertically from the transmitter, and with the recommended electric geared pump they can fire a jet of water a
distance of 6 - 8 m. If a working boat crane is fitted, the vacuum-moulded rowing board can be raised, swung outboard and lowered to the water in true scale style.

Specification: Length: 1160 mm Width: 250 mm Total displacement: 9000 g

Düsseldorf Fire Fighting Boat ... £165.52
Dusseldorf Fitting Set Pt No 1101 ... £69.48
Dusseldorf Special Fuction Set Pt No 1103 ... £61.29

Le Courageux Pt No 1025

New From Robbe Le Courageux is based on a Breton Fishing cutterThe full size vessels of the Le Courageux type can be found in numerous variants along the Breton coast .
The shape of hull and high bow design give this boat exceptionally good performance in rough sea's along the Breton and Atlantic coast .

The principle design features of the original vessel are reproduced in the model along with the impressive size and shape .
The powerful motor setup makes Le Courageux an interesting model to maneuver

Features The kit features many highly prefabricated components' so making this model more accessible to most modeling skill levels

Specification: Length 820mm Beam 300mm Draught 140mm

Le Courageux Pt No 1025 ... £442.40
Le Courageux Fitting Set Pt 1026 ... £114.43
Le Courageux Motor Set Pt 1027 ... £61.74

Robbe Antje II

Antje II is one of all the smaller working boats in the North and Baltic Seas .
Shrimping and fishing cutters are by far the most widespread, and they are also pressed into service for many other tasks. Their characteristically jaunty appearance makes them a great favourite amongst modellers, and the "Antje II" exploits this popularity to the full.

The kit components are highly pre-fabricated, with the aim of simplifying and speeding up the construction of the model.
The capacious hull offers ample space for a large battery, the drive motor and the radio control system.

A fittings set, No. 1111, is also available to give the boat an impressive scale appearance, and the final touch is the wood parts fittings set, No. 1113.

Specification : Lenght 640mm Beam 210mm Height 550mm

Robbe Antje II Pt No 1110 ... £117.50
Anje2 fittings Pt 1111 ... £30.64
Anje2 Wood fittings kit Pt 1113 ... £30.64

Najade Now with Brushless motor Pt No 1164

Najade Semi-scale model of a luxury motor yacht to 1:15 scale

Just like the full-size prototype the Najade features a large, roomy cabin, an imposing flying bridge and a lusty power system to ensure an impressive top speed.
The propulsion system is based on a ROXXY 3656-06 brushless motor driving the propeller direct via the propeller shaft; the entire power system is included in the kit. Construction of this superb model is hastened by many pre-fabricated parts, including the glazing which is moulded in clear brown-tinted material.
The fittings set is supplied as standard, and contains all the detail items required to give the Najade a perfect

Specification: Length: 960 mm Width: 300 mm Scale: 1:15 Total displacement: 3600 g

£214.57

San Diego Pt No 1045

Radio-controlled semi-scale model of a mega-yacht to 1:25 scale

The long, slim hull of the San Diego looks simply fantastic on the water. Fitted out with two powerful 700-size electric motors, with direct drive to a pair of contra-rotating surface-piercing propellers
The San Diego accelerates strongly and soon comes up onto the step and planes across the water. A pair of swivelling Navy Speed power systems provide excellent straight running characteristics combined with good manoeuvrability even in choppy water. The optional fittings set contains all you need to fit out your model with all the luxurious equipment featured by the full-size boat.

Crew figures not included in the kit.

Specification: Length: 1270 mm Width: 250 mm Scale: 1:25 Total displacement: 5000 g

San Diego ... £169.99
San Diego Fitting Set Pt No 1046 ... £51.98

MS Hanseatic Pt No 1177

MS Hanseatic
Commissioned by Hapag-Lloyd in 1993, and is classed as a luxurious cruise ship and one of the finest expedition vessels.
With a gross registered tonnage of 8378 the ship has one great advantage over conventional luxury liners: where the ´fat ships´ have to stop or make a detour, the ´MS Hanseatic´ simply carries on: in Arctic and Antarctic waters, and even South American rivers such as the Amazon, the Rio Negro or the Orinoko. The ´MS Hanseatic´ was specially designed to cope with the polar regions, and is classified in the highest ice class. Four inflatable boats for expeditions are carried on the ´MS Hanseatic´, and passenger excursions in them are considered to be the climax of the cruises.
Up to 184 passengers can be accommodated on the seven decks, plus a crew of 125 persons.
The ship is classified as a five-star vessel.With the kind approval of Hapag-Lloyd AG.The model:This kit is aimed at experienced marine modellers who enjoy a constructional challenge as well as the pleasure of running the model.
Many details of the original machine are included in our model of the ´MS Hanseatic´, and auxiliary working systems such as bow thruster, working stabilisers, lighting and engine sound systems can be installed by the modeller with experience of such installations.

Specification:
Length: 1230 mmWidth: 190mm Height: 358mm Scale: 1:100 Total displacement: 8400 g

MS Hanseatic ... £689.67
MS Hanseatic Fitting Set Pt No 1178 ... £519.04
MS Hanseatic Power Set Pt No 1179 ... £109.28

Sirius Rs 32 Pt No 1052

Highly prefabricated, elegant model yacht

It doesn´t matter whether you are a beginner or a more advanced modeller, the Sirius RS 32 is the yacht for the model skipper of the future

Her high level of pre-fabrication with her regatta-typical features, she is a favourite when it comes to choosing a new yacht.. When developing the Sirius RS32 the robbe team concentrated upon excellent sailing characteristics in light to medium winds with a fast and easy final assembly, all combined with a realistic scale-like appearance.

The Sirius is pre-built to the greatest possible extent. It only remains to fit the mast and sails.

Kit contents:
Hull and Deck in vacformed, white ABS-plastic , Hull and Deck bonded together , Internal parts and RC-installation fully installed , Removable glass-fibre keelAbnehmbares Glass-fibre sword keel and ballast bulb , Double cover protection against spray ingress to interior , Aluminium mast and boom , All hardware for fitting sails , Finished sail suit , Complete steering gear , Multi-colour decal set , Multi-lingual, illustrated assembly instructions , Boatstand

Specification: Length: 890 mm Width: 205 mm Height: 1640 mm Scale: 1:15 Total displacement: 2320 g Mast height: 1250 mm Sail area: 30.00 dm2

£209.00

Smaragd Pt No 1076

The Smaragd (Emerald) is a large model which can be sailed even in quite strong winds right down to very light wind conditions .In its basic version can be controlled with a simple two-channel radio control system up to a full blown multi channel .

The carefully optimized arrangement of the sail area allows the boat to achieve the maximum speed possible from the hull design even in moderate wind conditions on all headings.

This kit builds into a very impressive model indeed with high quality moulded parts along with metal and plastic fittings and good comprehensive instructions which is now typical of Robbe .
The build is on the medium to expert side of things so a good model if you have done or two kits before hand

Specification ::
* Length: 1380 mm * Width: 360 mm * Height: 2200 mm * Standard Sail area: approx. 80 dm2
* Scale: 1:10 * Total displacement: 12000 g * Ballast weight: 8000 g * Mast height: 1800 mm
*Draught: 300.00 mm

Our Kit comes complete with Fittings set 1077 and Keel 1078 and Mast 1079 Extra's are required to complete this model

£445.99

Valdivia Sailing Schooner Pt No 1140
Scale model of a sailing schooner to 1:20 scale
In the mid-1860s a Swedish distilling company placed a contract with the Stockholm dockyard of Soedra Varvet for the construction of a fast, elegant sailing schooner.

In 1868 the ?9 m long Vanadis was launched, rigged as a Newfoundland schooner. During her colorful career the vessels high speed was in demand, and at times she operated as a smuggling boat and as a customs vessel.
In the period 1978 to 1981 she underwent complete restoration in Hamburg, and since then she has sailed under the name Valdivia von Altona. She now serves as a charter vessel for extended sailing cruises, and has taken part with great success in international regattas.

This model is one of Robbe's best Sailing boats ment for the intermediate to expert builders though that said anyone with a good workshop could build this with a little time . Building and operating of this large model will present many hours of pleasure to the experienced marine modeller who enjoys working with wood and other materials. If you are one of them, our model of the Valdivia will take you back effortlessly to the atmospheric heyday of these marvelous sailing yachts.

Specification: Length: 1580 mm Width: 300 mm Height: 1300 mm Scale1:20
Total displacement: 9000 g

Robbe Valdivia Sailing Schooner ... £559.99
Valdivia Fittings set Pt No 1142 ... £195.99
Valdivia Keel Pt No 1141 ... £39.84
Valdivia Power Set Pt No 1144 ... £39.84

Robbe Windstar One Meter Design Pt No 1087

Radio-controlled one-meter sailing boat. An ideal beginner's boat in the international one-meter class

The Windstar Hull meets the rules of the international one-meter boat class. Its outstanding features are its fine sailing qualities and simple, well-balanced handling.

A special feature is the availability of different sail suits for strong, moderate and light wind conditions. The model is supplied with a white pigmented GRP hull. For competition work an optional non-pigmented hull can be used.

Specification:
Length: 1000 mm Width: 195 mm total displacement: 4000 g Ballast weight : 2100 g

Robbe Windstar One Meter Design ... £199.99
Windstar Standard Wind Sail Set Pt No 10873000 ... £96.60
Windstar Light Wind Sail Set Pt No 10872000 ... £96.60
Windstar Strong Wind Sail Set Pt No 10871000 ... £96.60

Comtess Pt No 1072

With her streamlined hull and integral keel fin the elegant Comtesse is capable of an impressive turn of speed even in just a light breeze.
However, the boat can still be sailed safely in stronger winds, as the deep keel makes it near impossible to capsize. The boat handles nicely balanced, making it easy for the newcomer to model sailing to trim it accurately.

As you would expect, the Comtesse can cope with all headings from tacking into wind right round to sailing before the wind, which means that it is possible to sail the boat to any pre-determined point and then back again.
The model is controlled by rudder and simultaneous adjustment of the mainsail and jib settings, i.e. all sailing maneuvers can be carried out using a simple two-channel radio control system and a sail servo .

The kit includes a moulded Plura hull, and all the other parts are pre-fabricated to ensure a short building time.

Specification:
Length: 950 mm Width: 230 mm Height: 1500 mm Total displacement: 3200 g Ballast weight: 1800 g
Mast height: 1200 mm Sail area: 30.00 dm2 Draught: 210.00 mm

Our Price includes the fitting set to the model though extra items are required to complete see more info

£149.99

Robbe Atlantis Wishbone Scooner Pt No 1130

Radio-controlled semi-scale model of a two-masted schooner to 1:20 scale
The original vessel was built in 1935 and is a 28 m long gaff-rigged schooner.

The special sail arrangement on the boat makes her stand out from the more familiar ship types of her time, and for this reason she is of particular interest to the modeller.

With a sail area of just on one square meter, distributed over several separate sails, and a streamlined hull with its characteristic extended keel, this imposing model offers an excellent performance and good maneuvering capability. Although the boat is quite heavy, the draught of the Atlantis is relatively small, so shallow in-shore waters present no problem.

The multiple sails give the operator plenty of scope for trimming the model to suit different wind speeds just by lowering and setting individual sails.
The boat features an ingenious tensioning mechanism which means that only one screw has to be slackened on each mast when it is time to transport the "Atlantis". All the shroud settings can be left unchanged.

This kit is for the intermediate /expert builder comes complete with preformed hull fittings pack I.E all the part for the deck bollards and lifebelts and such along with full English instructions our price also includes the wood fittings to plank the deck with .You can also add a motor pack for it to get you back to shore when the wind drops.

Specification:
Length: 1380 mm Width: 340 mm Height: 1730 mm Standard sail area: approx. 85.5 dm2
Scale: 1:20 Total displacement: 17500 g Ballast weight: 11000 g Mast height: 1420 mm Draught: 240.00 mm

Extra's are required to complete this mode : Fittings set 1134 , Keel 1131 and wood decking kit 1133.t

Atlantis Wishbone Scooner ... £373.96
Fittings Set Atlantis Pt No1134 ... £73.99
Wood decking kit 1133.T ... £93.51
Ballast Keel Atlantis Pt No 1131 ... £68.99
Atlantis Power set 11309000 ... £48.99
Atlantis Genoa Sail Set Pt No 1132 ... £82.61

Odin Pt No 1080

Radio-controlled semi-scale model of a harbour tug to 1:25 scaleThis model is designed to be fitted with the high-torque, low-drain Power 1000 electric motor, which gives running times of more than two hours in conjunction with a 12 Volt battery. The direct-drive four-bladed propeller runs in a swivelling Kort nozzle, endowing the boat with extraordinary manoeuvrability. The large model can accommodate numerous auxiliary working systems crew members not included.

Kit contents:
* Vacuum-moulded CNC-trimmed plastic hull
* Vacuum-moulded deck with integral coaming and broad openings under the engine room and warping winch

* Wheelhouse moulded in clear material; no separate windows to be fitted
* Die-cut and vacuum-moulded internal fittings
* Multi-lingual building instructions and plans

Specification: Length: 1200 mm Width: 350 mm Scale: 1:25 Total displacement: 18000 g

Odin PT No 1080 ... £260.54
Odin Fittings Set Pt No 1081 ... £242.00
Odin Power Set Pt No 1086 ... £87.86

Magin II.1 1123

Semi-scale model of a high-performance racing yacht to 1 : 10 scaleThe outstanding features of these high-performance racing yachts are their elegant design, luxurious fittings and - especially - their tremendously powerful engines.
To ensure that our model of the Magin Two should be as impressive in every respect as the full-size vessel, we placed special emphasis on re-creating its elegant lines. The requirement for high performance is fulfilled and even exceeded with the optional power set, containing two powerful, high-performance brushless motors: in test-runs we have recorded speeds of more than 60 km / hr.
The enormous performance and highly efficient double aluminium rudder system require an operator with steely nerves.

Kit contents:
# Vacuum-moulded ABS plastic hull, deck, cockpit and hatch covers
# CNC-machined plastic parts for installation of power system and RC system
# Double aluminium rudder system with linkage components
# Small parts for emergency-OFF plug
# Small assembly items
# Multi-colour decal sheet
# Multi-lingual building instructions
# Boatstand

Optional RC functions :
Rudder Throttle

Specification: Length: 1030 mm Width: 240 mm Height: 210 mm Total displacement: 3400 g

Needs Extras To complete please see more info

Magin II.1 Pt No 1123 ... £175.99
Magin II.1 Drive Set 1124 ... £139.99

Magin One

This is one quick little cookie Magin One. This is a model for the true speed freak.
Developed to incorporate the latest findings of the experts in the Mono II racing boat class, this sleek racer features a single-step hull, and its distinctive design makes it a focal point at any lake-side.

Powered by a Power 710 electric motor (available in a separate power set 1175 See more info !!) and 12 NC cells the model reached speeds of more than 40 km/hr during the test programme. This is a model for drivers with strong nerves!

Specification: Length: 850 mm Width: 200 mm Height: 200 mm Scale: 1:25 Total displacement: 2500 g

Magin One Pt No 1174 ... £94.99
Magin One Power Set Pt No 1175 Brushed Motor ... £76.62
Magin One Power Set Pt No 117510000 Brushless Motor ... £90.99

Happy Hunter Pt No 1106

Happy Hunter
Is a scale reproduction of a Dutch ocean-going salvage tug to a scale of 1 : 50.
The boat is powered by a direct-drive, i.e. non-geared system, in the form of two high-torque Power 755/40 electric motors.
These are low-revving power plants driving a pair of high-performance marine propellers. Fixed Kort nozzles increase thrust, and the boat is capable of carrying out extremely arduous towing tasks and complex maneuvers in conjunction with the bow thruster, which is an optional accessory.
The capacious plastic hull allows the modeller to install numerous auxiliary working systems, and experienced builders will enjoy fitting out the Happy Hunter with a working lighting system, radar, anchor winch, sound system and towing mechanism.
It is even possible to install a fully working crane; the crane itself is included in the kit.

Specification:

Length: 1035 mm Width: 235

Happy Hunter Pt No 1106 ... £385.20
Happy Hunter Power set Pt No 1108 ... £50.99
Happy Hunter Fittings Set Pt No 1107 ... £107.28

Seawolf V2 Pt No 1014

Model submarine with electric power and dynamic diving system
The Sea-Wolf is the longest serving model in our submarine fleet. Introduced many years ago, it began a successful period of submarine modelling for us which has lasted right up to the present day. In 1998 it was followed by the legendary Type VII boat, the U-47, and finally by our largest model, the Type XXI boat, the U-2540.The Sea-Wolf is the ideal submarine for all modellers, from the ambitious beginner through the modeller interested in a change of direction to the expert and connoisseur. After all, it offers an attractive combination of impressive appearance, reasonable building time and a fair system price.Specification: Length: 900 mm Width: 100 mm Height: 320 mm Total displacement: 4100

£146.10

German U boat U 47 Pt No 1114

Scale model of a German U-boat to 1:40 scale, with dynamic diving system
fittings and electric motors includedDuring the development stage of our model of the U 47 we concentrated especially on maximum possible scale fidelity, and accurate reproduction of the detail features of the vessel. In spite of its impressive length of more than 1.7 m, the boat is highly manoeuvrable and has a good turn of speed. It features the dynamic method of submerging, and all these features make for a highly realistic model when in and under the water.
An important feature of this imposing boat is the flooding slots in the outer skin, and these are factory-cut in order to shorten the building time. This eliminates the time-consuming work of drilling or machining these openings.Specification:
Length: 1700 mm
Width: 160 mm
Scale: 1:40
Total displacement: 8500 g

£335.00

U-boat U2540 Pt No 1214

Scale model of the type XXI submarine to 1:40 scale for dynamic divingThe U-boat U2540 was built at the Blohm und Voss yard in Hamburg in 1944, and the vessel was commissioned in January 1945. During the crew training phase in early May 1945 the boat was attacked by a British bomber off Fehmarn, and was eventually scuttled by the crew. By this point in history this was a typical fate of the last U-boats commissioned by the German War Navy.The Type XXI boat U2540
Just like the legendary Robbe U47, this model is capable of submerged running using the dynamic method of diving. The model is almost 2 metres long, and consists - like the U47 - of a fore ship and after ship joined together by a central screwed joint. When the two parts are separated, the motors and RC equipment assembly can be withdrawn from the pressure vessel. This model also features pre-cut flooding slots to save the modeller the time-consuming task of drilling and/or machining the openings. In contrast to the U47 the forward hydroplanes are controlled by a servo, rather than mechanically by means of a paddle. As an option these forward hydroplanes can be folded in for surface running, just as on the full-size vessel. This is an imposing model which always attracts a large number of fascinated spectators.RC functions: Rudder, Forward hydroplanes, Aft hydroplanes, Motor control, Folding forward hydroplanes

Specification: Length: 1915 mm Width: 210 mm Height: 330 mm Total displacement: 12000 g

£530.00

U31 212 Class Submarine Pt No 1215

1 : 40 scale dynamic-diving model of the German Federal Navy’s 212-class submarine

The full-size boat:
These subs were developed at the Howaldtswerke-Deutsche Werft GmbH (HDW) dockyard in Kiel. It is the world’s first submarine type to be equipped with a hybrid fuel cell power system. Basically the boat is propelled by an electric motor. For surface running the motor is powered by a diesel generator, but when the boat is submerged, electrical current is supplied by a hydrogen fuel cell system. U 31 was the first 212 A class to be built, and the vessel was launched in March 2002; this is the basis for our model.

The model:
The model of the U 31 has been developed and built using proven methods of construction and pre-fabrication, i.e. the same methods used on the U 2540. However, the diameter of the pressure vessel has been increased by 35 mm in order to give the large hull the stiffness required.
The pressure vessel is fitted with an internal multi-part CNC-machined installation frame, which houses all the essential RC and electrical system components. Just like the full-size sub, model of the U31 features a New ultra-modern power system: in this case a slow-reving, high-torque brushless electric motor to provide large amounts of very usable thrust .

Specification:
Length: 1430 mm Width: 180 mm Height: 470 mm Scale: 1:40 Total displacement: 19000 g

U31 212 Class Submarine Pt No 1215 ... £377.00
Power Set For U31 Pt No 1-1216 ... £214.00
Ballast Weight for U31 Pt No1-1217 ... £88.88
Static Dive Unit For U31 Pt No 1-1218 ... £252.36

Schutze High Speed Mine Sweeper

Schutze was built as a high-speed minesweeper of the "Schütze" class these were commissioned in the German Federal Navy in 1960.
The armament consisted of one 40 mm cannon, plus comprehensive special equipment for mine seeking and sweeping.

The model:
The Schütze is a new version of a vessel which has been part of our model boat range for many years, and since its ´decommissioning´ more of our customers have enquired about this boat than virtually any other model.
Since we did not want simply to resume production of the ´old´ model, we decided to carry out a complete revision of the entire kit.
The geared motors formerly used have been superseded by powerful direct-drive motors. The high level of pre-fabrication of the detail parts and fittings make the Schütze a great choice for any modeller with relatively little experience in building scale models.
When the robbe ´Schütze´ cuts through the water at high speed, it is almost indistinguishable from the full-size vessel.

Specification:
Length: 1200 mm Width: 200 mm Scale: 1:40 Total displacement: 6000 g

Schutze High Speed Mine Sweeper Pt No 1180 ... £179.00
Schutze Fitting set Pt No 1181 ... £129.00
Schutze Power set Pt No 1182 ... £63.34

Please Note Prices are subject to change without notice

Westbourne Model.co.uk
Is owned and run by
Westbourne Model Centre
41 Seamoor Rd Westbourne Dorset
BH4 9AE Tell/Fax + 44 (0) 1202 763480